ROUGH COUNTRY 0-2" N3 REAR SHOCKS ; 05-23 TACOMA 2WD/4WD

Toyota Tacoma Shocks: Generation, Front or Rear and Lift Height

This guide is for Toyota Tacoma owners in Canada replacing tired shocks or matching shocks to a lift. Three things decide it: which Tacoma generation you have, whether you need front or rear shocks, and the lift height the shock is built for.

A shock absorber controls how quickly the spring compresses and rebounds. Shocks are matched to a ride height range, so confirm the lift height on your truck before ordering. A rear shock for a stock Tacoma and one for a 6-inch lift are different parts.

What to check first on your Tacoma

Rear shocks by lift range: Rough Country N3

Rough Country sizes each N3 rear shock to a lift range and says they replace the factory rear shocks to control suspension travel at the raised ride height. All three below fit the 2005-2023 Tacoma, 2WD and 4WD, which covers both the 2005-2015 and 2016-2023 pages.

More from the brand: Rough Country Shocks & Struts.

Revtek rear, 2005-2020

The Revtek Rear Nitro Shock for the 05-20 Tacoma is a rear shock for 2005-2020 Tacoma trucks. No lift range is listed, so check the product page for the ride height it is matched to before you order.

Bilstein B6 4600 fronts

Bilstein calls the B6 4600 a direct-fit upgrade to the OE shock for stock height light trucks and SUVs, with a 46mm monotube and a velocity-sensitive, digressive piston that reacts to changing road conditions. Bilstein says each one is tuned for its application.

2016-2023 Tacoma

The Bilstein B6 4600 Front Shocks (BIL24-265966) fit 2016-2023 Toyota Tacoma SR, SR5, TRD Sport, TRD Off-Road and Limited trucks, plus some special editions (check the fitment table on the product page for your trim), and Bilstein lists them at 21.80 inches extended.

2024-2026 Tacoma

For the new truck, the Bilstein B6 4600 Front Shock Absorber (24-333221) fits 2024-2026 Toyota Tacoma SR, SR5, TRD Sport and TRD Off-Road trucks and the 2024 Limited, front position. More from the brand: Bilstein.

Before you order

Know your generation, position and current lift, then use the vehicle page above or browse all Shocks, Struts & Suspension. If the shocks are part of a lift, our Toyota Tacoma lift kit guide covers the kits by year, drive and trim. Road salt and slush are a fact of Canadian winters, so spring tire changeover is a good time to look over shocks and mounts. Prices are in Canadian dollars and orders ship across Canada.

FAQ

Do 2005-2023 Tacoma shocks fit a 2024 Tacoma?

Not the ones in this guide. The Rough Country rears fit 2005-2023 and the Revtek rear 2005-2020. The Bilstein B6 4600 front (24-333221) is the one for the 2024-2026 Tacoma.

Which rear shock suits my lifted Tacoma?

Match the shock to your lift: Rough Country offers 0-2", 2.5-5.5" and 6-7" N3 rears for the 05-23 Tacoma 2WD/4WD.

Are Bilstein B6 4600 shocks for lifted trucks?

Bilstein describes the B6 4600 as a direct-fit upgrade for stock height light trucks and SUVs. Check the product page if your Tacoma is lifted.

What about a 1995-2004 Tacoma?

This guide names no first-generation shock. The 1995-2004 Toyota Tacoma shock page lists what fits, and the vehicle selector filters to your year.

Back to blog