Zone 2" Leveling Kit (ZONF1204)

Ford Ranger Leveling Kits: How to Choose by Year and Lift Height

This guide is for Ford Ranger owners in Canada who want to lift the front of the truck to reduce its factory nose-down stance. The Ranger has been sold in clearly different generations, so the decision starts with your model year, then the lift height, then the type of kit: strut spacers, a spacer combined with a spring preload spacer, or a shock-and-spring assembly.

A leveling kit raises the front to match the factory rear height, without changing the rear suspension. If you want lift at both ends instead, our Ford Ranger lift kit guide by generation covers full lift kits.

What to check first on your Ranger

  • Model year. The kits below fit 2019-2022, 2019-2021, 2019-2023, 2024-2026, 2024 and newer, or 1998-2009 trucks. The Leveling Kits for 2019-2023 Ford Ranger page gathers the kits for that generation.
  • Drive. The ReadyLift, Zone and Superlift kits are for 4WD trucks, and the MaxTrac 2" kit is for 2WD. For the others, check the fitment table on the product page.
  • Lift height. Kits here range from 1.5 inches to 3 inches, and the Bilstein kit is adjustable.
  • Wheels and tires. ReadyLift lists the wheel and tire sizes its 2" and 3" kits allow; if new tires are part of the plan, read those lists first.

Types of Ranger leveling kits

ReadyLift's 2" kit uses top and bottom strut mount spacers: the kit includes 2 top and 2 lower strut extension spacers, and ReadyLift says it needs no cutting or modifications and keeps some of the factory rake. Its 3" kit uses Top Hat Replacement technology, which combines a top mount leveling kit with a spring preload spacer in one component; ReadyLift says it needs no cutting or modifications but does require a spring compressor. The Bilstein B8 6112 is a different approach: it pairs (2) 60mm shock absorbers with (2) coil springs and (2) billet aluminum spring seats, and snap-ring grooves in the body give 0-2.75 inches of front lift, depending on application. The MaxTrac 2" kit is a pair of aluminum front coil spacers.

ReadyLift, Zone Offroad and Bilstein

ReadyLift 3" and 2" for the 2019-2022 Ranger, 4WD

The ReadyLift 3" Leveling Kit — 2019-2022 Ford Ranger, 4WD (66-2930) raises the front 3 inches. ReadyLift lists 18x9 and 20x9 wheel fitments with 265/60R18, 265/65R18 and 275/55R20 tires, says the front crash bars can be loosened and moved forward for clearance, and states the kit is not for use with the Ranger Tremor Edition. The ReadyLift 2" Leveling Kit — 2019-2022 Ford Ranger, 4WD (66-2920) adds 2 inches at the front and lists 265/60R18 and 275/55R20 tire fitments. Both fit the 2019-2022 Ford Ranger XL, XLT and Lariat with 4WD.

Zone 2" for the 2019-2021 Ranger

The Zone 2" Leveling Kit fits the 2019-2021 Ford Ranger with 4WD and raises the front 2 inches. See also Zone Offroad Leveling Kits.

ReadyLift 1.5" for the 2024-2026 Ranger

The ReadyLift 1.5" Leveling Kit — 2024-2026 Ford Ranger (66-24200) fits the 2024-2026 Ford Ranger with 4WD and raises the front 1.5 inches to reduce the factory nose-down stance. More kits: ReadyLift Leveling Kits.

Bilstein B8 6112

The Bilstein Leveling Kit (BIL47-294301) is listed at 19.38 inches extended. Bilstein describes a 2.65-inch outside-diameter body with a 60mm digressive piston, and says the large body adds oil capacity and cooling. It fits the 2019-2023 Ford Ranger XL, XLT and Lariat.

More kits to compare

The Superlift 2.5" Leveling Kit fits the 2024-2025 Ford Ranger with 4WD and raises the front 2.5 inches; for later years, check the fitment table on the product page. For the older truck, the MaxTrac Suspension 2" Leveling Kit (Pair) fits the 1998-2009 Ford Ranger with 2WD and is a two-piece aluminum front set. The MaxTrac 3"/2" Leveling Kit fits the 1998-2009 Ford Ranger; which end gets which height is not stated, so check its product page. See also MaxTrac Leveling Kits.

Where to browse

Owners of a 2019-2023 truck can start with Leveling Kits for 2019-2023 Ford Ranger. For other years, open the full Truck Leveling Kits category and use the vehicle selector. Each product page lists the years, makes and models it fits. Orders ship across Canada and are priced in Canadian dollars.

FAQ

Which leveling kit fits a 2024 Ford Ranger?

In this guide, the ReadyLift 1.5" kit (66-24200) fits the 2024-2026 Ford Ranger with 4WD, and the Superlift 2.5" kit fits the 2024-2025 Ford Ranger with 4WD, with later years in its fitment table. Use the vehicle selector and the fitment table on each product page to confirm your drive and trim.

Do I need a spring compressor to install one?

It depends on the kit. ReadyLift says its 3" kit (66-2930) requires a spring compressor. Its 2" kit (66-2920) uses top and lower strut extension spacers. Check each product page before you book the install.

Can I fit bigger tires after leveling my Ranger?

ReadyLift lists 265/60R18, 265/65R18 and 275/55R20 fitments for its 3" kit and 265/60R18 or 275/55R20 for its 2" kit, with the wheel sizes and offsets on the product page. For other kits, check the product page.

Will a leveling kit change my rear suspension?

No. A leveling kit raises the front to match the factory rear height, without changing the rear suspension.

Back to blog