ELEMENT FRONT BUMPER WITH POWER ACTUATED HIDE-AWAY LIGHT BAR MOUNT ; 19-24 RAM 1500 5.7L V8 (EXCLUDING REBEL/WARLOCK/TRX

Ram 1500 Bumpers: Front, Rear and TRX Options by Generation

This guide is for Ram 1500 owners replacing a front or rear bumper, usually for lights or recovery points. Settle three things in order: which Ram 1500 you drive, front or rear, and what the bumper has to carry. Then check each bumper for engine and trim exclusions.

What to check first on a Ram 1500

  • Generation. Our bumper pages split the truck three ways: Bumpers for 2009-2018 Ram 1500, Bumpers for 2019-2026 Ram 1500 and Bumpers for 2019-2024 Ram 1500 Classic. Many bumpers fit fewer years than the page (2019-2023, 2013-2018), so check the years for each bumper too.
  • Engine and trim. Some bumpers are for one engine or exclude trims. One front bumper below is for the 5.7L V8 and excludes the Rebel, Warlock and TRX; two others are for the 2021 TRX only.
  • Front or rear. A replacement bumper mounts to the frame in place of the factory front or rear bumper and forms the truck's outer protection at that end.
  • Sensors, camera, winch and fog lights. Replacement bumpers change approach or departure angle and mounting points, so check sensor, camera, winch and fog light compatibility on each product page.
  • Drive. Most bumpers here state no drive; the fitment table on each product page and the vehicle selector confirm it.

Go Rhino for the 2019 and later Ram 1500

Element front bumper with hide-away light bar mount

The Go Rhino Element Front Bumper with Power Actuated Hide-Away Light Bar Mount fits the 2019-2024 Ram 1500 with the 5.7L V8, excluding the Rebel, Warlock and TRX. Its light bar mount is power-actuated and hides away.

Rear bumper for 2019-2023

The Go Rhino Rear Bumper for 2019-2023 RAM 1500 is a black replacement rear bumper. Check sensor and camera compatibility before you order. Both are on the Go Rhino Bumpers page.

More 2019 and later front and rear bumpers

Body Armor 4x4 Ambush Series front (non-winch)

The Body Armor 4x4 2019-2024 Ram 1500 Ambush Series Front Bumper (Nonwinch) is built from 3/16" and 1/4" cold roll steel, bolts on, is OE sensor compatible and has two welded D-ring mounts. It is not winch compatible. Light fitment is a 30" dual-row LED bar and two cube LEDs, and the finish is a two-stage black light-texture powder coat. Its fitment table lists 4WD trucks, so confirm your drive on the product page. See Body Armor 4x4 Bumpers.

Ironman 4x4 Raid Series rear bumper kit

The Ironman 4x4 Raid Series Rear Bumper Kit (RTB085K-NN) fits the 2019-2024 Ram 1500 DT. Ironman 4x4 says it bolts on and comes with frame-mounted recovery points. See Ironman 4x4 Bumpers for the brand's other listings.

2021 Ram 1500 TRX

The TRX has its own bumpers. Both of these Addictive Desert Designs bumpers fit the 2021 Ram 1500 TRX:

  • The Addictive Desert Designs TRX Bomber Front Bumper (Baja) has mounts for three Baja Designs LP6 round lights, with satin black powder coat panels and a hammer black powder coat finish.
  • The Addictive Desert Designs TRX Bomber Rear Bumper carries the low-profile plate steel design of the front bumper to the rear, with two rear-facing cube light mounts and backup sensor cutouts. ADD says the parking sensors and tow hooks remain functional, cutouts in the bottom form around the factory exhaust, and the side wings leave room for the factory bed step.

2009-2018 Ram 1500

For the previous truck, the Go Rhino Rear Bumper for 2013-2018 RAM Truck 1500 replaces the factory rear bumper. Owners of a 2009-2012 truck should start from the 2009-2018 page and check the years each bumper fits.

2025 or later

On a 2025 or 2026 truck, a bumper listed only up to 2023 or 2024 does not cover your year; check the 2019-2026 page for parts listed for later years.

Winter and the rest of the range

A bumper on a Canadian Ram spends the winter in slush and road salt, so plan any light wiring before you install. Every bumper we list is in the Bumpers category, and each product page lists the years, makes and models it fits. We ship across Canada, priced in Canadian dollars.

FAQ

Which of these bumpers fit the Ram 1500 TRX?

The two Addictive Desert Designs Bomber bumpers, front (Baja) and rear, fit the 2021 Ram 1500 TRX. The Go Rhino Element front bumper excludes the TRX, Rebel and Warlock. For any other, check the fitment table on the product page.

Will an aftermarket bumper keep my parking sensors?

It depends on the bumper. Body Armor 4x4 says its Ambush front bumper is OE sensor compatible, and Addictive Desert Designs says its TRX Bomber rear bumper keeps the parking sensors and tow hooks working and has backup sensor cutouts. For the others, check sensor and camera compatibility on the product page.

Can I mount a winch on the Body Armor 4x4 Ambush front bumper?

No. It is the non-winch version, and Body Armor 4x4 lists it as non-winch compatible.

Do bumpers for the 2019 and later Ram 1500 fit the Ram 1500 Classic?

Do not assume so. The Classic has its own bumper page, and none of the bumpers named in this guide is listed for the Classic. Start from the Classic page and confirm with the vehicle selector.

Back to blog