Smittybilt 2007-2018 Wrangler Factory Style 2In Receiver Hitch/Class Iii/Bolt On/Gloss Black

Jeep Wrangler Trailer Hitches: What to Check Before You Buy

This guide is for Jeep Wrangler owners who want a trailer hitch, whether to pull a small trailer or to carry receiver-mounted gear. Start with your Wrangler's generation, then look at what each hitch's product page and maker description actually state, and check what your Jeep itself is rated to tow before you hook anything up.

What to check first on your Wrangler

  • Generation and year. The hitches in this guide fit the 2007-2018 Jeep Wrangler, the 2007-2016 Jeep Wrangler, or the 2007-2017 Wrangler plus the 2018 Wrangler JK, and Smittybilt's description says its hitch is for the JK Wrangler. The 2018 model year was sold as both the outgoing JK and the new JL, so if you have a 2018, confirm which one you have before ordering.
  • Class and receiver. Of the hitches here, only the Smittybilt is listed with a class (Class III). The others are not listed with a class or receiver size, so read the product page before you buy and match your ball mount and accessories to the receiver you end up with.
  • Your Jeep's own rating. A hitch does not change what the vehicle is rated to tow. Your owner's manual gives your Wrangler's towing figures for its configuration; stay within the lower of the hitch's rating and the Jeep's.
  • Wiring and brakes. A trailer with lights needs a wiring connection, and some trailers need brakes and a brake controller. Trailer lighting, brake and safety chain requirements vary by province, so check your province's rules before you tow.

What is on offer

For the Wrangler, the choice here is between receiver hitches listed for the JK years and receiver accessories that use a hitch you already have. The hitches carry the load; an accessory such as a hitch step slides into the receiver instead of a ball mount. The product page for each one lists the exact years it fits, and the vehicle selector filters by your Jeep.

Hitches and hitch accessories for the Wrangler

Smittybilt Class III Trailer Hitch

The Smittybilt Class III Trailer Hitch — 2007-2018 Jeep Wrangler is a gloss black trailer hitch receiver. Smittybilt describes it as a factory-style towing solution to start towing with your JK Wrangler, and it is the only hitch here listed with a class.

Crown Automotive Trailer Hitch Kit

The Crown Automotive Trailer Hitch Kit is a trailer hitch receiver kit. It fits the 2007-2017 Jeep Wrangler and the 2018 Jeep Wrangler JK, with no class or receiver size listed; the fitment table on the product page lists each Wrangler year it fits, so check yours there before ordering.

Rock Slide Engineering OEM Receiver Hitch Step

The Rock Slide Engineering OEM Receiver Hitch Step is not a hitch itself: it is a receiver hitch step. It fits the 1987-1995 and 1997-2022 Jeep Wrangler, the 2020-2022 Jeep Gladiator and the 2021-2022 Ford Bronco. See the product page for how it mounts and which receiver it suits.

Rugged Ridge Trailer Hitch

The Rugged Ridge Trailer Hitch — 2007-2016 Jeep Wrangler is a trailer hitch receiver for the 2007-2016 Jeep Wrangler. No class or receiver size is listed, so read the product page for those details.

Before your first tow

Once the hitch is on, the rest of a safe setup is the ball mount, the wiring and, for heavier trailers, a brake controller. Our towing basics guide to hitches, brake controllers and wiring walks through how those pieces fit together. Snow, slush and road salt get into receivers and trailer plugs over a Canadian winter, so look over the receiver and connector before each trip.

Where to browse

The Trailer Hitches for 2007-2018 Jeep Wrangler JK page gathers the hitches listed for the JK, and the Trailer Hitches category covers other vehicles. Each product page lists the years, makes and models it fits; use the vehicle selector to confirm yours. Prices are in Canadian dollars and orders ship across Canada.

FAQ

Which trailer hitch fits a JK Wrangler?

The Smittybilt Class III hitch fits the 2007-2018 Jeep Wrangler and is described by Smittybilt as for the JK, and the Rugged Ridge hitch fits the 2007-2016 Jeep Wrangler. The Crown Automotive kit lists its years in the fitment table. Confirm your year with the vehicle selector.

What class are these hitches?

Only the Smittybilt is listed with a class: Class III. For the others, check the product page, and always stay within your Wrangler's own towing rating from the owner's manual.

Is there a hitch here for a JL Wrangler?

None of the hitches in this guide is listed for the JL. The Rock Slide Engineering hitch step fits the 1997-2022 Jeep Wrangler, but it is an accessory for a receiver, not a hitch. Use the vehicle selector to find hitches listed for your JL.

Do I need trailer wiring and brakes?

A trailer with lights needs a wiring connection, and requirements for trailer brakes and lighting vary, so check your province's rules. The towing basics guide explains the parts involved.

Back to blog