Jeep Gladiator Running Boards, Side Steps and Nerf Bars
Share
This guide is for Jeep Gladiator owners choosing a step into the cab: a fixed side step or nerf bar, a drop step, or a powered running board that deploys when you open the door. Decide between fixed and powered first, then match the years each step fits to your Gladiator.
What to check first on your Gladiator
- Years. Our vehicle page covers the 2020-2026 Gladiator, but the steps vary: the Raptor RT steps fit 2020-2026, the DV8 steps are listed from 2020 on, the Carr LD step fits 2020-2023, the VoltStep kit 2020-2024, and the Rugged Ridge Spartan nerf bar fits 2020 only. Match the years to your Jeep.
- Cab. Steps are cut to the cab length they are listed for. The VoltStep kit is for the Gladiator Crew Cab 4-door; the others state no cab, so check the fitment table.
- Install. Raptor lists a quick no-drill install for its RT steps. The VoltStep kit requires cutting and drilling. For the rest, the product page has the details.
- Steps for more than one Jeep. Carr's LD Step fits the 2020-2023 Jeep Gladiator and the 2018-2023 Jeep Wrangler. Our fitment table on the product page lists the Gladiator years it is matched to.
Fixed steps or powered running boards
Fixed side step bars mount to the rocker panel and are cut to the cab length they are listed for. Raptor's RT steps are an angled drop step. Rugged Ridge's Spartan is a nerf bar whose main tube sits high and tight to the body, with a drop-down step at each door. A powered running board such as Go Rhino's VoltStep stays tucked under the rocker panel until a door opens. Pick the type first; the product page then gives the fit.
Fixed steps and nerf bars
- Carr LD Step, Assist/Side Step, XM3 Polished, Pair, for select Jeep vehicles (111252): a polished two-piece side step set. Carr says the LD step's wider and deeper stepping surface extends further than its other steps, for easier access to the vehicle.
- Raptor 2020+ Gladiator Cab Length Gen 2 RT Steps: Raptor calls the Gen 2 the 2.0 version of its original RT Drop Steps, 30% longer and wider, with a slotted step for traction in any weather. They are 14-gauge steel with a 3-stage black powder coat, and Raptor rates the step for 500 lbs. The kit includes driver and passenger boards, brackets and hardware.
- Rugged Ridge Spartan Nerf Bar, Black, 2020 Jeep Gladiator JT: a 3-inch OD tube of .084-inch wall steel with a 3-stage textured black powder coat. Rugged Ridge says the main tube mounts higher than conventional tube steps, with patented drop-down steps with tread plate at each door, and includes the installation hardware and instructions.
Powered running boards
- Go Rhino 20-24 Jeep Gladiator CC 4dr VoltStep Electric Running Board Kit (Cut/Drill Req.), Textured Black: opening a door triggers magnetic sensors that move the boards into position, and closing it retracts them beneath the rocker panels to keep ground clearance. The maker describes aluminum alloy boards with a 6-inch anti-slip step, dual electric motors on each board to power through snow and slush, an automatic safety-stop system for obstructions, integrated LED lights, and door switches that leave the OBD port free. A vehicle-specific installation kit and instructions are included.
More side steps
- DV8 Offroad Side Steps, 2020+ Jeep Gladiator (SRGL-08): a black side step bar set that mounts to the rocker panel. The page gives few further details, so read the fitment table and photos before you order.
Shop by Gladiator and by brand
Start from Running Boards for 2020-2026 Jeep Gladiator. To browse by type, see Truck Running Boards and Truck Steps: Nerf Bars & Side Steps. By brand: Carr Nerf & Step Bars, Raptor Series Running Boards, Raptor Series Nerf & Step Bars, Rugged Ridge Nerf & Step Bars, Go Rhino Running Boards and Go Rhino Nerf & Step Bars.
Each product page lists the years, makes and models it fits. Use the vehicle selector to confirm your year; we ship across Canada and prices are in Canadian dollars.
FAQ
Fixed step or power running board on a Gladiator?
A fixed step is always in place. A powered board like the VoltStep tucks under the rocker panel and deploys when a door opens; the maker says dual motors per board power through snow and slush. It also requires cutting and drilling.
Will a 2020 Gladiator step fit a newer Gladiator?
Check the years each step fits. The Raptor RT steps fit 2020-2026, the DV8 side steps are listed from 2020 on, the VoltStep kit fits 2020-2024, and the Rugged Ridge Spartan nerf bar fits 2020 only. Confirm your year with the vehicle selector.
Do these steps need drilling?
Raptor lists a quick no-drill install for its Gen 2 RT steps. The VoltStep kit requires cutting and drilling. For the Carr, Rugged Ridge and DV8 steps, check the product page.
What comes with the Rugged Ridge Spartan nerf bar?
Rugged Ridge says it includes all the installation hardware and instructions needed.





