Rough Country 2.5" Leveling KIT ; 20-23 Gladiator 4WD (RCT63400)

Jeep Gladiator Leveling Kit: Front Leveling for 2020-2023 and 2024+

This guide is for Jeep Gladiator owners who want to raise the front of the truck to match the rear, often to make room for larger tires. Two choices decide it: your model year, because several kits stop at 2023 while others start at 2024, and the type of kit, a front spacer kit or a kit that replaces the front springs and the shocks.

What to check first on a Gladiator

  • Model year. The Rough Country kits fit 2020-2023. Bilstein splits its kit into 2020-2023 and 2024-2026 versions. The Skyjacker kit fits 2020-2025 by trim, the Superlift kit fits 2020-2025 except the Overland, and the Zone kit starts at 2020; for later years on those two, check the fitment table on the product page. Kits listed for the truck are gathered on Leveling Kits for 2020-2026 Jeep Gladiator.
  • Drive. The Rough Country and Superlift kits are for 4WD trucks. Confirm the rest in the fitment table.
  • Front lift. 2.5" (Rough Country, Skyjacker, Superlift), 2" (Zone) or 1.3-1.9in (Bilstein, by Bilstein's description).
  • Tires. Decide on your tire size first, and check your province's rules on tire size before you order.

Rough Country 2.5" kits for the 2020-2023 Gladiator

Three Rough Country part numbers are 2.5" leveling kits for the 2020-2023 Gladiator with 4WD, and Rough Country describes each as raising the front end by 2.5 inches to bring the vehicle closer to level:

The listings do not say how the three differ, so open each product page and compare the parts lists before you choose. More from the brand: Rough Country Leveling Kits.

Front spacer kits

The Skyjacker Suspension 2.5 in. Front Metal Spacer Kit, 2020-2025 Jeep Gladiator JT (G25MSFB) comes with more than the spacers. Skyjacker lists front metal spacers, front shock extensions, front extended sway bar end links, front bump stop extensions and Grade 8 mounting hardware, and calls it a 100 percent bolt-on installation. See Skyjacker Leveling Kits for the rest of the range.

Other 2.5" and 2" kits

Neither maker lists the contents in the description, so read the parts list on the product page.

Spring and shock kits from Bilstein

Bilstein's B8 5100 leveling kits work differently. Bilstein says each consists of four B8 5100 shock absorbers and two custom-matched, longer-travel front coil springs with the supporting hardware, bolts into the factory locations and gives 1.3-1.9in of front lift. Bilstein also says the kit lets the Gladiator run 35" tires with stock fenders and increases wheel travel and articulation on the front axle. Pick the one for your model year:

Leveling kit or lift kit?

A leveling kit raises the front to match the factory rear height, without changing the rear suspension. If you want the whole truck higher, read Leveling kit vs lift kit. The full category is under Truck Leveling Kits. Each product page lists the years, makes and models it fits; use the vehicle selector to confirm your Gladiator. We ship across Canada, priced in Canadian dollars.

FAQ

Which leveling kits fit a 2024 Gladiator?

The Bilstein B8 5100 kit for 2024-2026, the Skyjacker spacer kit (2020-2025, by trim), the Superlift kit (2020-2025, except the Overland) and the Zone kit (from 2020; check its fitment table for your year). The Rough Country kits stop at 2023.

Can I run 35-inch tires after leveling?

Bilstein says its B8 5100 leveling kits let the Gladiator run 35" tires with stock fenders. The other makers here do not state a tire size, so check the product page and your province's rules.

What is the difference between a spacer kit and the Bilstein kit?

The Skyjacker kit adds front metal spacers with shock extensions, sway bar end links and bump stop extensions. The Bilstein kit is two longer-travel front coil springs and four shocks that bolt into the factory locations.

Why are there three Rough Country 2.5" kits?

They are described the same way apart from the part number (RCT-63400, RCT-63430A, RCT-64830B). Compare the parts lists on the three product pages.

Back to blog