ROUGH COUNTRY 0-3" N3 FRONT SHOCKS ; 11-26 SILVERADO/SIERRA 2500HD/3500HD

GMC Sierra 2500 HD / 3500 HD Shocks Guide

This guide is for owners of a GMC Sierra 2500 HD or 3500 HD in Canada who need shocks, either to replace tired ones or to match a lift. The choice comes down to three things: your truck's years, front or rear, and how much lift the truck has right now.

A shock absorber controls how quickly the spring compresses and rebounds. Rough Country's listings note that shocks are matched to a ride height range, so confirm the lift height on your truck before ordering. A front shock for a stock-height HD and one for a truck lifted 5 to 8 inches are different parts.

What to check first on your Sierra HD

  • Years. The shocks here are listed for 01-10, 01-19, 11-19 or 11-26 trucks. A front and a rear shock for the same truck can carry different spans, so check both.
  • Front or rear. Every shock here is sold for one position. ICON goes one step further and sells some rear shocks by side, such as Driver Rear.
  • Lift height. Rough Country and ICON give each shock a lift range in inches. Pick the range your truck sits in as it is today.
  • Shared listings. Many of these shocks fit the Silverado and Sierra together, or are listed for GM 2500/3500 HD. That is normal for these trucks; the fitment table still decides.

Our shock pages split the HD by generation: Shocks & Struts for 2007-2014 GMC Sierra 2500/3500 HD and Shocks & Struts for 2015-2019 GMC Sierra 2500/3500 HD. For other years, use the vehicle selector. Each product page lists the years, makes and models it fits.

Rough Country N3 shocks

Rough Country sells its N3 shocks for the HD by position and lift range, so you buy the front and rear separately.

Front

Rough Country says these front shocks replace the factory units to control suspension travel at the raised ride height. Note that only the 0-3" front fits through 2026; the two taller ranges are for 2011-2019.

Rear

The rear ranges do not step the same way as the fronts, so match each end of the truck to its own lift height. More from the brand: Rough Country Shocks & Struts.

ICON V.S. 2.0 HD Series

ICON makes these for the 2011-2026 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD with 0-1.5 inches of lift; the fitment table on the product page lists the 3500 HD cabs. ICON describes the V.S. 2.0 HD as having hard anodized 6061 aluminum bodies with thicker cylinder walls and taller DU bearings than its 2.0 Aluminum Series, a nitrogen-charged monotube design, and says the shocks are 100% rebuildable and revalveable.

  • ICON 0-1.5in Rear VS 2.0 HD IR: ICON lists this one with an internal nitrogen reservoir, which it says helps keep performance consistent under hard use.
  • ICON 0-1.5in Driver Rear VS 2.0 HD RR: the remote-reservoir version. ICON says remote reservoirs increase oil volume and heat dissipation to resist the overheating and cavitation that lead to damper fade. It is for the driver side only, so plan for the passenger side as well.

More from the brand: ICON Vehicle Dynamics.

Fabtech for 2001-2010 trucks

The Fabtech 01-10 GM C/K2500HD C/K3500 Rear Performance Shock Absorber is a rear shock; for the trucks it fits, check the fitment table on the product page. Fabtech lists twin-tube hydraulic construction, 9-stage valving, a closed-cell foam insert to reduce shock fade at high speeds, polyurethane bushings, and says it is designed to work with Fabtech lift kits. The listing gives no lift range, so check the product page. More: Fabtech Shocks & Struts.

Before you order

Confirm your years, the position and your current lift, then browse the full Shocks, Struts & Suspension category with the vehicle selector set to your Sierra HD. After a winter of road salt, spring tire changeover is a good time to look over shocks, bushings and mounts. Prices are in Canadian dollars and orders ship across Canada.

FAQ

Do Silverado HD shocks fit a Sierra HD?

The Rough Country shocks in this guide fit the Silverado and Sierra 2500HD / 3500HD together, and the ICON shocks are listed for GM 2500/3500 HD. Confirm your exact year in the fitment table on the product page.

Which shocks suit a Sierra HD at stock height?

Look for a range that starts at 0: the Rough Country 0-3" front (11-26) and 0-3" rear (01-19), or the ICON 0-1.5in rears (11-26).

What is the difference between ICON IR and RR?

In ICON's listings the IR shock has an internal nitrogen reservoir and the RR has a remote reservoir, which ICON says adds oil volume and heat dissipation for hard use.

Do I need the same lift range front and rear?

Not necessarily. Rough Country sells its HD fronts in 0-3", 3.5-4.5" and 5-8" ranges and its rears in 0-3" and 3.5-7.5" ranges. Match each end to the lift it actually has.

Back to blog