Over time, stock springs sag, get rusty, and simply wear out. BMR's suspension believes the right springs go beyond looks your 1979-2004 Mustang needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. Every BMR'spring is compressed solid at the factory, not once, but twice. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. These springs will drop the front end of your 1979-2004 Ford Mustang 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR's suspension!BMR's suspensions SP028 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours.

Part number: SP028R