Significantly reduce rear cradle movement in your Sixth Gen Camaro with a Polyurethane Rear Cradle Bushing Kit from BMR's suspension. These bushings are made from low-deflection, 95-durometer polyurethane, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking with only moderate increases in NVH. Each bushing is designed to exact tolerances, which are designed by BMR. BMR's Rear Cradle Bushings reduce cradle movement over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These voids, coupled with soft material produce excessive differential movement during normal and aggressive driving. BMR's poly cradle bushings replace the entire OE rubber bushing, minimizing differential movement by replacing the soft rubber OE bushings with solid two-piece poly bushings. This reduces cradle movement, reducing wheel hop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. BMR's suspensions BK061 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique.